Switch languageSwitch languageSwitch languageSwitch languageSwitch languageSwitch languageSwitch languageSwitch languageSwitch language

Kumera Drum Dryer

Kumera Drum Dryer

Drum Dryer

Kumera Drum Dryer

Drum Dryer

Kumera Drum Dryer

Drum Dryer Facility

Kumera Drum Dryers are suitable for continuous drying of different kinds of minerals.

In Kumera Drum Dryers using the direct heating principle, heat is transferred to the material almost entirely by convection.

The drum dryer size depends on the amount of water to be evaporated, the amount of the product and its final moisture content. All three depend greatly on the material and drying purpose.

Kumera Drum Dryer Volume and Technical Data

The volume needed for drying different products varies in practice between 10 and 60 m3/t H2O/h. The drum size also depends on the direction of the drying gas flow in relation to the product flow. Both concurrent and countercurrent drum dryers are produced. The countercurrent dryer is more effective and economical because the temperature difference between the drying gas and product stays relatively high throughout the drying process. The use of countercurrent dryers is restricted by the inflammability of the product and its behaviour at high temperatures. A countercurrent dryer is 20 to 30% smaller than a cocurrent dryer used for the same purpose.

Benefits of the Kumera Drum Dyer:

  • high capacity, upto 200 t/h
  • robust construction and low maintenance requirement
  • favourable CAPEX and COPEX figures
  • high energy and operational efficiency
  • many worldwide references for materials, such as sand, phosphate, copper concentrate, etc.

Technical specifications and references available upon request.

Kumera Corporation, Kumerankatu 2 FI-11100 Riihimäki, Finland Tel. +358 20 7554 200[email protected] legal notice / Code of Conduct